Abstracts

Abstracts of ProMine presentations at Conferences

Arvanitidis, N.D. et al (2012) ‘Using 3D/4D modeling tools in exploration of gold-polymetallic potential areas in Greece’, European Geosciences Union (EGU) General Assembly 2012. Vienna 22-27th April.
[IGME-GR, HG]

Arvanitidis, N. (2011) ‘The European Union 2020 Strategy: implications for Geosciences - innovative visions for raw materials’, International Conference on EU 2020 Strategy in Mineral Commodities Management. Warsaw, 19-20 September 2011.
[IGME-GR]

Arvanitidis, N.D. (2010). ‘New metallogenetic concepts and sustainability perspectives for non-energy metallic minerals in central Macedonia, Greece’. Proceedings of the 12th International Congress of the Geological Society of Greece, Bulletin of the Geological Society of Greece, XLIII, No5, 2437-2445. Patras, 19−22 May. (Download)
[IGME-GR]

Arvanitidis, N.D. (2010). ‘New metallogenetic concepts and sustainability perspectives for non-energy metallic minerals in central Macedonia, Greece’. Proceedings of the 12th International Congress of the Geological Society of Greece, Bulletin of the Geological Society of Greece, XLIII, No5, 2437-2445. Patras, 19−22 May. (Download)
[IGME-GR]

Arvanitidis, N.D., Michael, C., Papavasileiou, K. and Perantonis, G. (2010) ‘Gold-polymetallic deposits in Greece: Genetic types and economic perspectives’, XIX Congress of the Carpathian Balkan Geological Association,CBGA 2010. Thessaloniki, 23−26 September, Abstracts Volume, p28. (Download)
[IGME-GR]

Arvanitidis, N.D. et al (2012) ‘GIS-based datasets of mineral deposits and man-made resources as valuable exploration tools for discovering potential ore deposits in Greece’, 7th EUropean Congress on Regional Geoscientific Cartography and Information Systems (EUREGEO). Bologna, 12-15 June. (Download)
[IGME-GR]

Arvanitidis, N.D. et al (2012) ‘Using 3D/4D modeling tools in exploration for gold-polymetallic potential areas in Greece’, 7th EUropean Congress on Regional Geoscientific Cartography and Information Systems (EUREGEO). Bologna, 12-15 June. (Download) [IGME-GR]

Baker J., Cassard D., Gaál G., Grundfelt B., Hugues P.D, Kaija J., Kurylak W., Spiteri A., Weihed P. (2011) ‘A new approach to mineral resources in Europe – ProMine’. Sustainable production and consumption of mineral resources – integrating the EUs social agenda and resource efficiency. Wroclav, Poland,20-22 October.
[SELOR]

Baker J., Brouwers J., Gaál G., Harlin A., Kaija J., Kurylak W., Sarlin J. and Teir S. (2011) ‘Nano-particle products from new mineral resources in Europe – ProMine’, EuroNanoForum 2011, Budapest, Hungary, 30 May − 1 June.
[SELOR, TU/e, GTK, VTT, IMN]

Batista et al. (2011) ‘Fingerprints for Mining products and wastes of the S. Domingos, Aljustrel and Neves Corvo Mines - A sustainable perspective’, VIII Iberian Geochemistry Conference / XVII Geochemicals Week. Castelo Branco, 24-28 September.
[LNEG]

Batista et al. (2012) ‘Base metals and other elements potential in waste materials resulting in improvement of the wastes environmental quality’, 9th International Symposium on Environmental Geochemistry. Aveiro, Portugal, 15-21 July. (Download)
[LNEG]

Bauer, T.E., Skyttä, P., Dehghannejad, M., Tavakoli, S., Weihed, P. (2011) ‘From deposit to regional scale – 4-dimensional geological modelling in the Skellefte Mining District, Sweden’, This email address is being protected from spambots. You need JavaScript enabled to view it. – workshop on Geological Modeling. Copenhagen, 7-9 December.
[LTU]

Bauer, T.E., Tavakoli, S., Dehghannejad, M. Garcia, M. and Weihed, P. (2010) ‘4-Dimensional Geological Modelling of the Skellefte District, Sweden’, 5th 3D GeoInfo Conference. Berlin, 3-4 November. The international archives of the photogrammetry, remote sensing and spatial information sciences. W 15 suppl. ISPRS Commission IV - Working Group 8, 2010. pp. 93-96.
[LTU]

Ehinger, S., Janneck, E., Martin, M., Glombitza, F., Pinka, J. and Koch, T. (2010) ‘ProMine – Nano-particle products from new mineral resources in Europe:
Schwertmannite – Raw material and valuable resource from mine water treatment processes’, Freiberger Forschungsforum Research Conference. Freiberg, 9–11 June. (Download)
[GEOS]

Gaál. (2011) ‘New Aspects of Exploration and Mining in Europe - Promine’, 8th Fennoscandian Exploration and Mining – FEM 2011. Levi, Lapland, 1-3 November.
[GTK]

Gaál, G. (2010) ‘Nano-particle products from new mineral resources in Europe – ProMine’, 11th Joint Science and technology Cooperation Committee – Workshop on Nanotechnologies. Sydney, 7 June. (Download)
[GTK]

Gaál, G., Cassard, D., Schaeben, H. Royer, J., Weihed, P., Pelleter, E., Caumon, G., Bauer, T., Collon-Drouaillet, P. Gabriel, P. and Gietzel, J. (2010) ‘ProMine - PanEuropean Mineral Resource Assessment and 4D Deposit Modeling’, Conference of the International Association of Mathematical Geosciences. Budapest, 28 August – 2 September.
[GTK], [BRGM], [TuBAF], [INPL], [LTU]

Gaál, G. et al (2012) ‘Pan European Mineral Resource Assessment: The ProMine Project’, 34th Session of the International Geological Congress (IGC). Brisbane, Australia, 5-10 August.
[GTK] (Download)

Gabriel, P., Gietzel, J. and Schaeben, H. (2010) ‘A model for spatial and spatio-temporal geoscience data’, GeoDarmstadt 2010 − Geowissenschaften sichern Zukunft - Geosciences secure the future, 10 - 13 October, Kurzfassungen der Vorträge und Poster -Abstracts of Lectures & Posters, Hrsg.: Andreas Hoppe; Heinz-Gerd Röhling; Christoph Schüth 2010. 624 Seiten (Schriftenreihe der Deutschen Gesellschaft für Geowissenschaften, Heft 68) ISBN 978-3-510-49219-0. (Download)
[TuBAF]

Gabriel, P., Gietzel J., Le, H.H., Schaeben, H. (2011), ‘A model for spatial geoscience data and its implementation’, IAMG 2011 Meeting. Salzburg, Austria, 5−9 September.
[TU BAF]

Gabriel P., Gietzel J., Le H.H., Schaeben H. (2011) ‘A network based data store for geoscience data and its implementation’, 31st gOcad Meeting. Nancy, France, 7−10 June. (Download)
[TU BAF]

Granado, I. et al (2012) ‘3D data integration for modelling in the Portuguese sector of the Iberian Pyrite Belt (IPB)’, 34th Session of the International Geological Congress (IGC). Brisbane, Australia, 5-10 August. (Download)
[LNEG]

Guezennec, A.G., Hanke, M., Spolaore, P., Chmielarz, A., Joulian, C., Ménard, Y. and d’Hugues, P. (2012) ‘Bio-hydrometallurgy applied to carbonate-rich polymineral concentrate for copper recovery’, XXVI International Mineral Processing Congress (IMPC 2012). New Delhi, 24-28 September. (Download)
[BRGM, IMN]

Hanke, M., Baranek, W. and Chmielarz, A. (2011) ‘Direct electrowinning of copper from solution after Cu concentrate bioleaching’. International Conference: Copper Metallurgy – 50th Anniversary of KGH Polska Miedz S.A. Kraków, Krakow, Poland, 26−28 October. (Download)
[IMN]

Hartsch J. (2012) ‘About Genetic Aspects of the Copper Mineralisation at the Zechstein Basis in the Weißwasser Region / Lusatia’, International Copper Ore Mining Congress 2012, Lubin, Poland, 16-18 July. (Download)
[GEOS]

Hedrich, S. and Johnson, D.B. (2012) ‘Selective recovery of metals from Maurliden (Sweden) mine water using novel biomineralization technologies’, Biohydrometallurgy '12. Falmouth, 18-20 June. (Download)
[BANGOR]

Heinonen, S. (2011) ‘Use of seismic reflection profiling for 3D-modeling of mineralized regions: A case study from Pyhäsalmi, Finland’, AGU Fall Meeting 2011. San Francisco, 3-9 December.
[PMO]

Heinonen, S., Imaña, M., Kukkonen, I. and Heikkinen, P. (2010) ‘Seismic imaging of deep massive sulphides in Pyhäsalmi, Finland’, Seismix 2010 Symposium. Cairns, Australia, 29 August – 3 September. (Download)
[PMO, GTK]

Heinonen, S., Imaña, M., Mäki, T., Heikkinen, P. and Kukkonen, I., (2011) ‘Reflection seismics for structural 3D modeling of Pyhäsalmi mining area’, EGU 2011 Conference, Vienna, 3-8 April.
[PMO]

Heinonen, S., Osorio, M. I., Kukkonen, I. and Heikkinen, P. (2010) ‘Seismic imaging of deep massive sulphides in Pyhäsalmi, Finland’, LITHOSPHERE 2010 Symposium. Helsinki, 27−28 October. (Download)
[PMO, GTK]

Janneck, E., Arnold, I., Koch, T., Meyer, J., Burghardt, D. and Ehinger, S. (2010) ‘Microbial synthesis of schwertmannite from lignite mine water and its utilization for removal of arsenic from mine waters and for production of iron pigments’, International Mine Water Association (IMWA) Symposium. Cape Breton, Nova Scotia, 5−12 September. (Download)
[GEOS]

Kaija, J., Gaal, G., Cassard, D., Weihed, P., Kurylak, W., d’Hughes, P., Grundfelt, B. and Spiteri, A. (2010) ‘Clean extractive industry to deliver new products to manufacturing sector: Introduction to ProMine project’ (Oral Presentation), 1st China-EU Workshop on Clean Production Technologies. Beijing, 17−18 March. [GTK], [BRGM], [LTU], [IMN], [KEMAKTA], [IRMCo] (Download)

Kenttä, E. et al (2012) 'Silica pigment produced from silicate mining sidestreams for ink-jet paper coating application', 8th International Paper and Coating Chemistry Symposium. Stockholm, 10-14 June. (Download)
[VTT]

Kettle, J. (2010) ‘Nano-particle products from new mineral resources in Europe’, “NANOfutures”: European Technology Integration and Innovation Platform (ETIP) in Nanotechnology. Gijón, 15-16 June. (Download)
[VTT]

Kettle, J., Sarlin, J., Teir, S. and Räsänen, L. (2010) ‘Nano-Particle Products from New Mineral Resources in Europe’, 2010 TAPPI International Conference on Nanotechnology for the Forest Product Industry. Espoo, 27-29 September. (Download)
[VTT]

Laine E., Luukas J., Ruotsalainen A., Suppala I., Kousa J., Lahtinen R. (2011) ‘3D modeling of the bedrock surrounding the Lampinsaari and Kuuhkamo Zn-Cu deposits in the Vihanti area,Finland’, EGU 2011 Conference, Vienna, 3-8 April. (Download)
[GTK]

Lazaro, A. and Brouwers, J. H. (2010) ‘Nano-silica production by a sustainable process; application in building materials’, 8th fib PhD Symposium in Civil Engineering. Kongens Lyngby, 20-23 June. (Download)
[TU/e]

Leszczyńska-Sejda, K., Benke, G., Anyszkiewicz, K., Chmielarz, A., Satora, W., Kozub K. (2012) ‘Hydrometallurgical methods for production of nickel(II) and cobalt(II) perrhenates – semi-products for manufacture of Re-Ni, Re-Co alloy powders’. European Metallurgical Conference EMC 2013 ‘Non-Ferrous Metals for the Sustainable Development in our World’. Weimar, Germany, 23-26 June. (Download)
[IMN, Ecoren]

Mejia, P. and Royer, J.J. (2012) ‘Restoring Past Deformations and Hydraulic fracturing using Python in GoCAD’, 32nd GoCad Meeting, Nancy, 4-7 September. (Download)
[INPL]

Michael C., Arvanitidis N.D., Gaál G., Papavasileiou K., Iliadis A., Christidis C. (2012) 'Orogenic mineralizations – a new exploration target for gold-Polymetallic ore deposits in Greece'. Scientific Conference of the Geologic Society of Greece. Athens, 6 February.
[IGME-GR]

Pinka, J., Ehinger, S., Martin, M. (2010) ‘Potential recovery of by-product metals during the revival of mining in Saxony’. 2nd International Conference: By-Product Metals in Non-Ferrous Metals Industry. Wroclaw, 13-15th October. (Download)
[GEOS]

Prajsnar, R., Czernecki, J. (2012) ‘Transformation of environmentally hazardous slags into mineral resources’. European Metallurgical Conference EMC 2013 ‘Non-Ferrous Metals for the Sustainable Development in our World’. Weimar, Germany, 23-26 June. (Download)
[IMN]

Serrano, J.J., Kauniskangas, E. And Cassard, D. (2010) ‘ProMine: architecture, portal and web services to provide a European mineral resources information system’, 4th INSPIRE Conference. Krakow, 22-25 June. (Download)
[BRGM], [GTK]

Spolaore, P., Joulian, C., Ménard, Y. and d’Hugues, P. (2010) ‘Non-traditional operating conditions for a copper concentrate continuous bioleaching’, Biohydromet ’10. Cape Town, 8-9 November. (Download)
[BRGM]

Teir, S., Kettle, J., Harlin, A. and Sarlin, J. (2010) ‘Production of silica and calcium carbonate particles from silicate minerals for inkjet paper coating and filler purposes’, ACEME10 – 3rd International Conference on Accelerated Carbonation for Environmental and Materials Engineering. Turku (Finland), 29 November - 1 December.
[VTT]

Vuollo, J., Cassard, D., Simons, B. And Seymon, A. (2010) ‘The earth resource data exchange model (EarthResourceML) – a tool for delivering INSPIRE and ProMine mineral resource data’, 4th INSPIRE Conf erence. Krakow, 22-25 June. (Download)
[GTK], [BRGM]

Weihed, P. (2010). ‘ProMine project: The 4D modelling of mineral belts’, AIMS 2010: Mineral Resources and Mine Development, Aachen, 25-26 May.
[LTU]

Weihed P. (2011) ‘Consequences of the RMI and the EU report on critical metals’, SDIMI 2011– Aachen International Mining Symposia, Sustainable Development in the Minerals Industry, From Primary Production to Sustainable Supply Chains, Aachen, Germany, 14-17 June. (Download)
[LTU]

Wrona, A., Czepelak, M., Staszewski, M., Woch, M., Kaminska, M., Osadnik, M. and Kolacz, D. (2010) ‘Properties of master alloys produced by powder metallurgy for production of rhenium-containing superalloys’, 2nd International Conference: By-product Metals in Non-Ferrous Industry. Wroclaw, 13-15 October. (Download)
[IMN]